Filter
Top Products
30
5. Reference
5-2. Environmental Settings (Digital signals only)
Depending upon your operating environment, it may be necessary to set the frequency that corresponds
to your graphics board. If you install it for the first time or change environment, set the monitor.
NOTE
• Refer to the manual of the graphics board.
• These environment described below can be set regardless of whether or not the computer is running.
How to set
1
Press to turn off the unit.
2
Press again while pressing .
3
Select the input signal using the in the <Signal Selection> menu at the center
of the monitor.
Use to select (or just confirm) the frequency that corresponds to your
graphics board, and then press .
- Normal:
Horizontal scanning frequency : 31 - 76kHz
Vertical scanning frequency : 59 -61Hz
- Wide:
Horizontal scanning frequency : 26 - 78kHz
Vertical scanning frequency : 47.5 -63Hz
4
Restart the computer if the settings have been changed.