Filter
Top Products
24
5. Reference
5. Reference
5-1. Attaching an Arm
The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the
LCD monitor.
NOTE
•
When attaching an arm or stand, follow the instructions of their user’s manual.
•
When using another manufacturer’s arm or stand, confirm the following in advance and select one
conforming to the VESA standard. Use M4 × 12 mm screws supplied with the monitor.
-
Clearance between the screw holes: 100 mm × 100 mm
-
Thickness of plate: 2.6 mm
-
Strong enough to support weight of the monitor unit (except the stand) and attachments such as
cables.
•
Attach an arm or stand to meet the following tilt angles of the monitor.– Up 45 degrees, down 45
degrees (Within operating range)
•
Connect the cables after attaching an arm.
Setup Procedure
1
Lay the LCD monitor on a soft cloth spread over on a stable surface with the
panel surface facing down.
2
Remove the stand. (Prepare a screwdriver.)
Unscrew the four screws securing the unit and the stand with the screwdriver.
3
Attach the monitor to the arm or stand.
Secure the stand to the monitor with four screws using a screwdriver.