Filter
Top Products
English
4-2. Color Adjustment
In the analog input, perform the “Range Adjustment” (p.22) before making the
color adjustments.
The <Color> menu in the ScreenManager enables to change the color of the screen. By
using the <Color Mode>, the adjustment mode can be selected from <Custom mode> (to
adjust the color settings according to your preference) and <sRGB> mode.
NOTE
x Allow the LCD monitor to stabilize for at least 20 minutes before making image
adjustments. (Allow the monitor to warm up for at least 20 minutes before making
adjustments.)
x Performing the <Reset> of the <Color> menu returns the color settings to the
default settings.
x The values shown in percentages represent the current level within the specific
adjustment. They are available only as a reference tool. (To create an uniform white
or black screen, the percentages for each will probably not be the same.)
Adjustment Contents
Color ModeMenu
Custom sRGB
Function Descriptions Adjustable range
To set the brightness of the
screen
0
a
100%
Brightness
NOTE
x
Direct pressing the up and down control button also
can adjust the brightness. After the adjustment, press
Enter button to save the data.
To set the color temperature
4,000
a
10,000 K
in 500 K increments
(including 9,300 K).
Default setting is off
(normal white)
Temperature
(p.35)
-
NOTE
x
The values shown in the Kelvin are available only as a
reference tool.
x
Setting the temperature under 4,000 K or over 10,000
K invalidates the color temperature setting. (The color
temperature’s setting turns “OFF”.)
4. ADJUSTMENT
23