Filter
Top Products
English
28 4. ADJUSTMENT
To set the color temperature (p. 51)
→ Set the <Temperature>.
The <Temperature> can be set from 4,000 K to 10,000 K, in 500 K increments
(including 9,300 K). Default setting is off (normal white).
NOTE
• The values shown in the Kelvin are available only as a reference tool.
• Setting the temperature under 4,000 K or over 10,000 K invalidates the color
temperature setting. (The color temperature’s setting turns “OFF”.)
To change the saturation
→ Use the <Saturation> adjustment.
The <Saturation> can be selected from -16 ~ 16. Setting the minimum level (-16)
turns the image to the monochrome.
NOTE
• The <Saturation> adjustment may cause undisplayable color tone.
To change the flesh color, etc.
→ Use the <Hue> adjustment.
The <Hue> can be selected from –20 to 20.
NOTE
• The <Hue> adjustment may cause undisplayable color tone.
To change each color (red, green and blue)
→ Use the <Gain> (p. 50) adjustment
By adjusting the red, green and blue color tones for each mode, custom colors can
be defined. The 100 % indicates unadjusted condition. Display a white or gray
background image and adjust the <Gain>.
NOTE
• The values shown in the percentage are available only as a reference tool.
• Setting the <Temperature> (p. 28) invalidates the <Gain> adjustment. <Gain>
setting returns to the default: All the color indicates 100 %.
<sRGB> mode: To select <sRGB> mode
→ Select <sRGB>.
To set the Brightness of the screen
→ Use the <Brightness> adjustment.
See p. 27.