Filter
Top Products
English
16 3. SCREEN ADJUSTMENT
3-3. Color
By using the <Color Mode> in the <Color> menu, the adjustment mode can be selected
from standard mode (to set the color temperature and the color restoration), custom
mode (to adjust each color tone, (Red, Green and Blue) and sRGB mode. These modes
allow you to adjust the color settings according to your preference.
<Standard> mode to set the color temperature and the
color restoration
To set the color temperature
→ Set the <Temperature>.
Temperature can be set from 4,000 K to 10,000 K, in 500 K increments.
(Including the 9,300 K default setting.)
To restore the changed brightness and the color caused by long use to
close to those original ones.
→ Execute the <Color Restoration>.
The changed brightness and the color caused by long use can be corrected and
restored to close to those factory default settings.
[Adjustment Procedure]
(1) Execute the <Color Restoration>. (The operation takes about one minute.)
(2) When color restoration is completed, the original ScreenManager menu is
displayed.
NOTE
• Allow the monitor to stabilize for at least 60 minutes before executing this
function. Otherwise, the warning message "Still Warming Up! xx min. remain"
will appear on the screen.
• Execute this function in every fixed time (ex. 2000 hours usage), so that you
can keep stable brightness and color-tone for a long period.
• The total usage time (in hour) can be checked as the <Information> in the
<Others> menu.