Filter
Top Products
E
9
1 INSTALLATION
WARNING
• The equipment must be connected to a grounded main outlet.
• Use the enclosed power cord. If using the power cord other than the
enclosed one, use the following cord.
In USA and Canada, use a UL LISTED/CSA LABELED or CERTIFIED power cord
set meeting the following specifications:
*Rating: min. 125 V, 10 A *Length:max. 2.0 m *Type: SVT
*Plug type: NEMA 5-15P, Parallel blade, Grounding type, 125 V, 10 A
In Europe, use a proper European standard approved power cord meeting the
following specifications:
*Rating: min. 250 V, 10 A *Length:max. 2.0 m *Type: H05VV-F 3G 1 mm
2
Use a plug type approved by the country where you use.
Failure to do so may cause fire or electric shock.
5)Turn on the monitor first, then the PC. The monitor’s power indicator will light up
(green). The monitor will warm up briefly, then display an image. Whenever finishing
your operation, turn off the PC and the monitor.
• If an image does not appear, make sure that all connections have been made
properly. Refer to the “TROUBLESHOOTING” section on page 26 for additional
adivice.
1-2. Using the AUTO-SIZING Button
After connecting the monitor to the PC, first press the AUTO-SIZING button on the
front panel. The AUTO-SIZING function centers the displayed image, aligning the
image’s borders with respect to the monitor frame.
In general, press the AUTO-SIZING button whenever changing the graphics board or
the resolution or when image size and/or position is incorrect. If further adjustment is
required, adjust the picture size/position as desired using the Size/Position function in
the ScreenManager. Refer to page 12.
• The AUTO-SIZING function is intended for use on Macintosh, and IBM compatibles
running Windows. It may not work properly if either of the following applies:
-An AT-compatible PC running MS-DOS (not Windows).
-The background color for the “wallpaper” or “desktop” pattern is set to black.
• Some signals from the graphics board may not function properly.
• A solid-color screen (i.e. red, green, blue) may appear for an instant while perform-
ing the AUTO-SIZING function, this phenomenon is not a failure.