Filter
Top Products
English
2. CABLE CONNECTION
15
3.
Turn on the monitor’s main power and then switch on the PC’s
power.
The monitor’s power indicator will light up (blue).
If an image does not appear, refer to the “6. TROUBLESHOOTING” (p. 30)
for advice.
Whenever finished, turn off the PC and the monitor.
NOTE
z Adjust brightness of the screen depending on the brightness of your
environment. Too dark or too bright of a screen can cause eyestrain.
z Be sure to take adequate rests. A 10-minute rest period each hour is
suggested.
2-3. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI and the D-Sub mini 15 pin
connector on the back of the monitor.
Selecting the Active Input
The Input signal selection button on the front panel can be used to select either DVI
or D-Sub as the active input at any time. Every time the button is pressed, the input
changes. When switching the signal, the kind of the input signal (Analog or Digital) is
displayed for a few seconds on the right top corner of the screen.
2-4. Sound Connections
NOTE
z Always switch the monitor and audio devices or computers off whenever connecting
or disconnecting any audio devices (computer or CD player) to the monitor.
z Use the enclosed stereo mini-jack cable for connecting audio devices or
computers to the monitor.
1. Connect the stereo mini-jack cable to the external line in of the
monitor.
Input Signal Selection Button