Filter
Top Products
48
5 CLEANING
• Keep liquids away from the monitor.
Spillage into the cabinet may result in fire, electric shock, or
equipment damage.
If an object or liquid falls/spills into the cabinet, unplug the monitor
immediately. Have the unit checked by a qualified service engineer
before using it again.
Using the monitor in this condition could cause serious injury or
equipment damage.
• To ensure safety, always unplug the monitor before cleaning it.
Failure to do so may result in electric shock.
• Periodically clean the area around the plug.
Buildup of dust, water, or oil on the plug may result in fire.
• Never use thinner, benzene, or other strong solvents or abrasive
cleaners, as these may cause damage to the cabinet or CRT.
Periodic cleaning is recommended to keep the monitor looking new and to
prolong its operational lifetime. Clean the cabinet and CRT areas as
follows.
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth
using a mild detergent. Do not spray wax or cleaner directly onto the
cabinet. Do not clean with compressed air.
CRT Surface
The monitor comes with a special cloth specifically designed to remove
fingerprints and dust from the screen. The cloth is washable, and will
remain effective regardless of the number of times it is washed. If the
supplied cloth is not available, you can clean the CRT surface with gauze,
cotton, or lens paper.
If necessary, stubborn stains can be removed by moistening part of a cloth
with water or alcohol (ethanol, methanol, or isopropyl alcohol) to enhance
its cleaning power.
5 CLEANING
WARNING
CAUTION