Filter
Top Products
2. Installation
13
2-2. Cable Connection
NOTE
•Be sure that the power switches of both the PC and the monitor are OFF.
•Refer to the PC user's manual when connecting the monitor.
•Before making a connection for non monochrome signal only specifications, the monitor
must be configured. For more information, refer to “2-3. Environmental Settings”
(p. 16).
1
Rotate the monitor ninety degrees counter-clockwise into the portrait
position.
2
Connect the signal cable to the DVI-D input connector on the rear of
the monitor and to the video output connector on the PC.
After connecting, secure the cable connectors with the attached screw-in fasteners.
Signal Cable Connector on PC PC
Signal cable (FD-C39) Video Output Connector /
DVI-D
Exclusive graphics board
(p. 33)
Signal cable
(FD-C39)
Power cord
English