Filter
Top Products
Package Contents
________________________________
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
zArm
zUser’s Manual
zSheet (Compatible Screws List)
zMounting Screws, 4 pcs each
(For the compatible screws and monitors, refer to the ‘Compatible Screws List’.)
NOTE
zThe power cable and signal cable are wired to the arm.
Compatible Monitors and Desks
____________________
z
Monitors
M4
Supported Weight* 2.3 kg to 5.2 kg
Hole Spacing 75 mm x 75 mm / 100 mm x 100 mm
(VESA compatible)
100mm
M4
75mm
100mm
75mm
*Weight : Total weight of the monitor including the weight of the
cables and optional peripherals.
z
Desks
Thickness and
Depth
Refer to right figure
Weight Capability 50 kg min. (recommended)
Desk
20~60mm
More than 50mm
How to attach the monitor
_________________________
1. Clamp the arm to the edge of the desk.
Press the fitting against the edge of the desk and clam
p
with
turning the knob counter-clockwise.
Knob
Press against
the desk
2. Attach the monitor to the arm.
Use specified screws for tightening up referring to the ‘Compatible Screws List’.
Outer
Holes
Inner
Holes
Screw
When attaching the monitor employing 75 mm x 75 mm arm
mounting holes, use the inner holes on the shield plate.
When attaching the monitor employing 100 mm x 100 mm arm
mounting holes, use the outer holes on the shield plate.