Eizo R12 Computer Monitor User Manual


  Open as PDF
of 2
 
Specifications are subject to change without notice.
All product names are trademarks or registered trademarks of their respective companies.
Screen Administrator is a trademark, and EIZO and RadiForce are registered trademarks
of Eizo Nanao Corporation.
Published on chlorine-free paper.
Copyright © 2004 Eizo Nanao Corporation. All rights reserved.
(040220a) Printed in Japan, 2, 2004, 1K
153 Shimokashiwano, Matto, Ishikawa 924-8566 Japan
Phone +81-76-277-6792 Fax: +81-76-277-6793
radiforce.com
EIZO NANAO CORPORATION
19" CLASS COLOR LCD MONITOR
BRIGHTNESS STABILIZATION
Drift Correction Circuit
Quickly stabilizes the brightness level after
startup or coming out of power save mode.
Auto Brightness Control
The monitor detects and automatically com-
pensates for brightness changes caused by sur-
rounding temperatures and the passage of time
for stable brightness and longer service life.
AUTO FINE CONTRAST
This feature assigns a mode to a particular ap-
plication so the mode automatically changes
when the application runs. For example, use
Custom mode at a high brightness setting for
viewing a CT image or Text mode when going
over patient charts.
SLIM BEZEL DESIGN
Narrow bezels along all four sides save space
and require less eye movement in a multi-panel
environment. Other features include a 100 mm
height adjustable stand, 41˚ tilt, 70˚ swivel, and
90˚ portrait orientation.
Panel Size and Type
Cabinet Colors
Pixel Pitch
Display Colors
Viewing
Angles (H, V)
Scanning
Frequency (H, V)
Native Resolution
Brightness
Contrast Ratio
Dot Clock
Response Time
Input Signals
Sync Formats
Input Terminals
USB Ports / Standard
Active Display Size
(H x V)
Viewable Image Size
Power Management
Power Consumption
Power Save Mode
Height Adjustment
Range
Dimensions
(W x H x D)
Net Weight
Tilt / Swivel
Certifications &
Standards
Supplied
Accessories
48 cm (19") TFT color LCD panel
Black, Gray
0.294 x 0.294 mm
16.77 million from a palette of 1.06 billion
170˚, 170˚
Analog: 30 – 82 kHz, 49 – 86 Hz
Digital: 30 – 65 kHz, 59 – 61 Hz (VGA
Text: 69 – 71 Hz)
1280 x 1024
250 cd/m
2
450:1
Analog: 135 MHz, Digital: 108 MHz
50 ms (typical)
RGB Analog, DVI Standard 1.0
Separate, Composite, Sync-on-Green
DVI-I 29 pin x 2 (switchable)
1 upstream, 2 downstream / Rev.2.0
376 x 301 mm
481 mm (diagonal)
VESA DMPM, DVI DMPM
55 watts
Less than 8 watts
100 mm
With Stand: 414 x 409.5 – 509.5 x 202.7 mm
Without Stand: 414 x 340 x 64 mm
With Stand: 8.1 kg, Without Stand: 5.8 kg
40˚ Up, -1˚ Down / 35˚ Right, 35˚ Left
TÜV/GM (EN60601-1), CE Medical
Device Directive, CB (IEC60601-1), cTÜVus
(UL2601-1, CSA C22.2 No. 601-0), FCC-B,
Canadian ICE-003-B, VCCI-B, EIZO Eco
Products 2002
AC power cord, signal cables (DVI-D –
DVI-D, DVI-I – D-Sub), USB cable, user's
manual, EIZO Utility Disk (ScreenManager
Pro for LCD, ICC profile), ToneCurve
Tuning Utility, warranty registration card
Specifications
GRAPHICS BOARDS
Accessories
VREngine/SMD2-PCI
VREngine/SMD2-AGP
VREngine/MD2W
Graphics Board Specifications
Bus SMD2-PCI
Interface SMD2-AGP
MD2W
Output Terminals
Display SMD2-PCI
Resolutions SMD2-AGP
(portrait mode)
1
MD2W
Maximum SMD2-PCI
Power SMD2-AGP
Consumption MD2W
System Requirements / (Operating Environment)
Compatible
Operating Systems
Host Processor
Frequency
Main Memory
PCI 32 bit / (33 MHz / 66 MHz)
AGP4x
PCI 32 bit (33 MHz)
DVI-D x 2
up to 1200 x 1600 (single head)
up to 2400 x 1600 (dual head)
1200 x 1600 (single head)
2400 x 1600 (dual head)
23 watts
15 watts
Microsoft Windows 2000/XP
500 MHz or greater
256 MB or greater
MED2mp-PPP
MED2mp-PCI
MED2mp-AGP
Graphics Board Specifications
Bus Interface
Output Terminals
Display Resolutions
(portrait mode)
1
Maximum Power
Consumption
System Requirements / (Operating Environment)
Compatible
Operating Systems
Host Processor
Frequency
Main Memory
32 bit (33 MHz) / 64 bit (66 MHz)
DVI-I x 2
up to 1200 x 1600 (single head)
up to 2400 x 1600 (dual head)
40 watts
Microsoft Windows 2000/XP
600 MHz or greater
128 MB or greater
•Auto Fine Contrast is included with the bundled ScreenMan-
ager Pro for LCD application, which runs on Windows
98SE/Me/2000/XP only.
System Configuration
Graphics Board
(Option)
Calibration
Software
Photo
Sensor
RP-701
Panel Protector
(Option)
Monitor
(Option)
PANEL PROTECTOR
RP-701
Protects panel from dust and scratches.
DUAL HEIGHT ADJUSTABLE STAND
LS-HM1-D
Holds two monitors, offers a height adjustment
range of 75 mm in 6 stages, and supports portrait
and landscape orientation.
CALIBRATION KIT
Consists of photo sensor and calibration software
for various QC management tasks.
Dimensions
303
33
340
69.5
239.5
409.5
Adjustable Height
100
414
3
378.3
3
315.5
7.8
9.4
14.8
40˚
1˚
TILT
(Unit: mm)
Custom Mode Text Mode
1
Landscape mode also supported.
 previous