Eizo S1932 Computer Monitor User Manual


  Open as PDF
of 41
 
23
Chapter 3 Connecting Cables
●
Setting auto-selection of the input signal [Input Signal]
Enable:WheneitherPCisturnedofforentersthepower-savingmode,the
monitor automatically displays signals of another PC.
Disable:ThemonitordoesnotdetectthePC’ssignalsautomatically.Switchan
input signal with .
(1) Press .
The adjustment menu appears.
(2) Select (Tool).
(3) The Enable/Disable setting is toggled by selecting (Input Signal).
Enable
Disable
(4) Select .
The mode selected is set.
Note
• When “Enable” is selected for [Input
Signal], the monitor’s power-saving
function works only when the two
PCs are in the power-saving mode.
 previous next