Filter
Top Products
2
English
TroubleshootingSetting/AdjustmentInstallationPrior to use
Package Contents
Check that all the following items are included in the packaging box. If any items are missing or damaged, contact your local dealer.
NOTE
• Please keep the packaging box and materials for future movement or transport of the monitor.
□ Monitor
□ Power cord
□ Digital signal cable: FD-C39
□ Analog signal cable: FD-C16
□ EIZO USB cable: MD-C93
□ EIZO LCD Utility Disk (CD-ROM)
• User’s Manual of this monitor
□ UniColor Pro (CD-ROM)
• UniColor Pro User’s Manual
□ Setup Manual (this manual)
□ PRECAUTIONS
□ Limited warranty
□ Recycling Information
□ Mounting Screws (M4 x 12mm, 4 pcs)
Controls and Functions
1 Sensor Detects ambient brightness. BrightRegulator function (page 5).
2 Adjustment Lock button Locks the buttons to retain the display mode or the status adjusted or set.
3 Input Signal Selection button Switches input signals for display when two PCs are connected to the monitor.
4 Mode button Allows you to switch the display mode.
5 Auto button Performs the function to adjust the screen automatically. (analog input only)
6 Enter button
Displays the Adjustment menu, determines an item on the menu screen, and
saves values adjusted.
7 Control buttons (Left, Down,
Up, Right)
• Chooses an adjustment item or increases/decreases adjusted values for
advanced adjustments using the Adjustment menu (page 5).
• or button: Displays the brightness adjustment window (page 5).
8 Power button Turns the power on or off.
9 Power indicator
Indicates monitor’s operation status.
Blue: Operating Orange: Power saving Off: Power off
10 Security lock slot Complies with Kensington’s MicroSaver security system.
11
Power connector Connects the power connector.
12 Input signal connectors Left: Signal 1 (DVI-I connector), Right: Signal 2 (DVI-I connector)
13 USB port (Up)
Connect the PC to the monitor with a USB cable.
14
USB Port (Down) Connects a peripheral USB device.
15 Stand Used to adjust the height and angle of the monitor screen.
16 Cable holder Covers the monitor cables.
17
Option speaker (i·Sound L3)
mounting holes
Used to attach the option speaker (i·Sound L3). (May not allowed to attach the
option speaker depending on the stand type.)
* ScreenManager
®
is an EIZO’s nickname of the Adjustment menu. (For how to use ScreenManager, refer to the User’s Manual on
the EIZO LCD Utility Disk (CD-ROM).)
1
2
3 4 5 6 7 8
10
11 12 13 14
14
15
16
17
9
11 12 13
Adjustment menu
(*ScreenManager
®
)
(SX2761W only)
[SX2461W] [SX2761W]