Filter
Top Products
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.
Refer to the Terms of Use section on ni.com/legal for more information about National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade
names of their respective companies. For patents covering National Instruments products, refer to the
appropriate location: Help»Patents in your software, the patents.txt file on your media, or
ni.com/patents.
© 2006–2008 National Instruments Corporation. All rights reserved.
371910E-01 Jun08
When you reconnect and power on the device, it appears as My Device in
the Found New Hardware Wizard and Windows Device Manager, as shown
in Figure 19.
Note When the device is initially installed, the Windows alert message may display the
following:
Found New Hardware: M Series USB 62
xx
(OEM). This message appears
for a few seconds until the custom name appears and the Found New Hardware Wizard is
launched. This alert message device name cannot be changed.
Figure 19. “My Device” in the Found New Hardware Wizard and
Device Manager (Windows 2000)
Note Modifying the INF file will not change the USB-622x/625x/628x OEM device name
in Measurement & Automation Explorer (MAX).