Chapter 2 Hardware Installation
MXI-Express Series User Manual 2-2 ni.com
6. Line up the NI PCIe-8360 with the slot on the back panel. Slowly push
down on the top of the NI PCIe-8360 until its card-edge connector is
resting on the expansion slot receptacle. Using slow, evenly distributed
pressure, press the NI PCIe-8360 straight down until it seats in the
expansion slot.
7. Reinstall the bracket-retaining screw to secure the NI PCIe-8360 to the
back panel rail.
8. Replace the computer cover.
Figure 2-1. Installing the NI PCIe-8360
1 NI PCIe-8360
2 PCI Express x1 Card-Edge Connector
3 PCI Express Slot
1
3
2