National Instruments NI PXI-1042 Series Power Supply User Manual


 
NI PXI-1042 Series Power Supply Shuttle User Guide 6 ni.com
Over-current protection ..........................All outputs protected from short
circuit and overload with
automatic recovery
Over-voltage protection
3.3 V and 5 V...................................Clamped at 20 to 30% above
nominal output voltage
+12 V and –12 V .............................Clamped at 26 to 29 V difference
between +12 and –12 V outputs
Power supply shuttle MTTR...................Replacement in under 5 minutes
Compliance and Certifications
Safety
This product meets the requirements of the following standards of safety
for electrical equipment for measurement, control, and laboratory use:
IEC 61010-1, EN 61010-1
UL 61010-1, CSA 61010-1
Note For UL and other safety certifications, refer to the product label or the Online
Product Certification section.
Electromagnetic Compatibility
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
EN 61326 (IEC 61326): Class A emissions; Basic immunity
EN 55011 (CISPR 11): Group 1, Class A emissions
AS/NZS CISPR 11: Group 1, Class A emissions
FCC 47 CFR Part 15B: Class A emissions
ICES-001: Class A emissions
Note For the standards applied to assess the EMC of this product, refer to the Online
Product Certification section.
Note For EMC compliance, operate this product according to the documentation.