Filter
Top Products
Wider Compatibility
Adapting the latest advances in satellite technology to the circuitry
employed within the MultiSync LCD
200 monitor, NEC provides wide
range compatibility with today’s graphics driver technology. Because
the MultiSync LCD
200 monitor is analog through and through, it does
not require special analog to digital display or interface cards but can
accept RGB input directly. Consequently, the same display cards that
are used to drive the Multisync LCD200 monitor can also be used to
drive standard CRT monitors. NEC’s MultiSync LCD
200 monitor can
be used with a wide range of systems such as IBM PC compatible
computers, Macintosh and Power Macintosh.
FullScan Capability
Using NEC’s own FullScan Capability, all of the resolutions supported
on the MultiSync LCD
200 monitor are displayed full screen, utilizing
the most of the monitor’s large display area. Rather than displaying
640x480 resolution as a small box in the center of the MultiSync
LCD
200 monitor’s display, this VGA resolution is displayed full screen,
allowing for greater visibility.
Reduced Footprint
The MultiSync LCD200 monitor offers nearly the same viewable image
size as conventional 14-inch and 15-inch CRTs at 40% of the depth and
30% of the weight. With a depth of about 17 cm and a weight of 4 kg,
the reduced footprint of NEC’s MultiSync LCD monitor provides the
ideal solution for environments requiring superior image quality but
with size and weight limitations. And the monitor’s small footprint and
low weight allow it to be moved or transported easily from one location
to another.
Low Power Consumption
The MultiSync LCD200 monitor has been designed with NEC’s IPM
(Intelligent Power Manager) System. When utilized with an Energy
Star system or display card, the MultiSync LCD
200’s IPM System is an
innovative power-saving utilily that complies with both the EPA’s
Energy Star requirements and Europe’s NUTEK power management
E - 2 Introduction to the NEC MultiSync LCD200