Filter
Top Products
9
Specifications
Monitor MultiSync
®
77F Notes
Specifications Monitor
Picture Tube Diagonal: 17 inch 90° deflection, 0.21-0.25 mm variable
Viewable Image Size: 16.0 inch horizontal dot pitch, 0.24-0.28 mm variable
diagonal dot pitch, medium short persistence
phosphor, multi-layered, anti-static screen
coating, semi-tint screen, Invar Shadow Mask
and OptiClear
®
screen.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Horizontal: 31 kHz to 70 kHz Automatically
Range Vertical: 55 Hz to 120 Hz Automatically
Resolutions Supported 640 x 480 @ 60 to 120 Hz
Some systems may not support
Resolution based on
horizontal and
800 x 600 @ 55 to 110 Hz
all modes listed.
vertical frequencies only
832 x 624 @ 55 to 106 Hz
1024 x 768 @ 55 to 87 Hz .......................
NEC-Mitsubishi Electronics Display cites
1152 x 870 @ 55 to 77 Hz
recommended resolution at
1280 x 1024 @ 55 to 66 Hz
85 Hz for optimal display performance.
Active Display Area Horizontal:
310 mm/12.2 inches Dependent upon signal timing used,
(Factory Setting) Vertical:
232 mm/9.1 inches and does not
include border area.
Active Display Area
325 mm/12.8 inches Dependent upon signal timing used,
(Full Scan)
244 mm/9.6 inches and does not
include border area.
Power Supply
AC 100 – 240 V, 50-60 Hz
Current Rating 1.5A @ 100 – 240 V
Dimensions
403 mm (W) x 420 mm (H) x 420 mm (D)
15.9 inches (W) x 16.5 inches (H) x 16.5 inches (D)
Weight 16.7 kg
36.8 lbs
Environmental Considerations
Operating Temperature: 0°C to +35° C
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
Storage Temperature: -20°C to +60°C
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
MS77F97F112701.p65 11/27/01, 3:15 PM11