Filter
Top Products
Tools
Degauss Control: Eliminates the buildup of stray magnetic fields that
alter the correct scan of the electron beams and affect the purity of the
screen colors, focus and convergence. When activated, your screen
image will jump and waver a bit as the screen is demagnetized.
Caution: Please allow a minimum of 20 minutes to elapse
between uses of the Degauss Control.
Indicates the frequency setting of the monitor.
IPM
™
System: On: The IPM System works normally and all stages
of energy savings are utilized.
Off: The Off Mode of the IPM System is not used.
NOTE: For standard systems and graphics boards, keep the
factory setting at ON.
Selecting ALL RESET allows you to reset all OSM
™
control settings back to
the factory settings except IPM System. Individual settings can be reset
by highlighting the control to be reset and pressing the RESET button.
5
Controls
78131921 5/21/98, 2:25 PM7