Filter
Top Products
7. Restarting the System
160
7.1 Restarting the System
7.1.1 Restarting the System
The system can be restarted by using the reload command. Log is stored at restart time. For input format and
parameter of the command, see the manual "Operation Commands."
IP8800/S6700, IP8800/S6600, and IP8800/S6300
The following is an example showing how to select the parameter of the reload command when "restarting the
standby system" and collecting the CPU memory dump of BCU, CSU, and MSU according to the confirmation
message.
Step1
Select whether to restart or stop the system.
Figure 7-1: Selecting Restart/Stop of the System
As the standby system is restarted in Step 1, no parameter is selected as shown in figure above.
Step2
Next, select whether to collect the dump.
Figure 7-2: Selecting CPU Memory Dump Type
Select restart or
stop
Restarting the
system
Stopping the
system
Parameter to input None
Stop
Select whether to collect
memory dump
Collecting
memory dump
Not collecting
memory dump
Checking
memory dump
collection
Not checking memory
dump collection
Collects memory dump
when neither (checking/
not checking) is selected
Parameter to input
dump-image
dump-image
no-dump-image
None
-f