Filter
Top Products
Image Adjust Controls
H. SIZE
Adjusts the horizontal size by increasing or decreasing the
this setting.
FINE
Improves focus, clarity and image stability by increasing or
decreasing this setting.
NOTE: The Image Adjust Fine control must be used to
complete the setup of your MultiSync LCD
2010 monitor.
MultiSync LCD
1510, MultiSync LCD1510V monitor only
Automatically adjusts the H. Size or Fine settings.
MultiSync LCD2010 monitor only
Automatically adjusts the H. Size settings.
Colour Control System
Five colour presets select the desired colour setting. Each
colour setting is adjusted at the factory.
R,G,B: Increases or decreases Red, Green or Blue colour
depending upon which is selected. The change in colour will
appear on screen and the direction (increase or decrease)
will be shown by the bars.
Tools
OSM H. POS.
OSM V. POS.
You can choose where you would like the OSM control
window to appear on your screen. Selecting OSM Location
allows you to manually adjust the position of the OSM
control menu left, right, up or down.
ALL RESET
Selecting ALL RESET allows you to reset all OSM control
settings back to the factory settings. Individual settings can
be reset by highlighting the control to be used and pressing
the RESET button.
E - 20 Controls
78133551/Fix.PM5 98.3.17, 8:21 AM34