Filter
Top Products
2. Unclip memory module as shown in Fig. 6
Fig. 6 Removing the memory module
3. Remove the memory module from its slot and put it aside.
Removing the Wireless LAN & MDC Modem Module
To remove the Wireless and MDC Modem Module, first remove the battery (see Removing the
Battery), then perform the following steps:
1. Remove the screw retaining the mini PCI slot cover as shown in Fig. 7
Fig. 7 Removing the screws screw retaining the mini PCI slot cover
2. Disconnect the wireless antenna wires from the wireless module and release the two
screws retaining the MCD Modem.
M2.4x4.5 Silver
NEC Versa M320 Disassembly Manual
Page 7