Filter
Top Products
NEC VERSA M350/P550 Disassembly Manual
Page 20
4. Release the inverter board by remove the screw and disconnect all connectors as shown
in Fig. 29
Fig. 29 Removing the Inverter Board
5. Carefully lift up the LCD panel.
6. Remove the screws at both sides of the LCD panel in order to release the LCD hinges as
shown in Fig. 30
Fig. 30 Removing the LCD Panel hinges
Note: Beware when assembly LCD Bezel. You need to follow below instruction to ensure it properly
close at both left and right side of the Bezel.
1. Push on top of Bezel.
2. Push at the side of LCD cover inward to close the gap
M2x3 Copper
M2x3 Copper