Filter
Top Products
Hardware Information 5-3
MA4000 Installation Manager User Guide - Revision 7
Dual CPU check box
Select to identify when redundant SV8500 and SV7000 T10 processors
are used.
Dual Time Division check box
Select to identify when redundant SV7000 T10 processors are
multiplexing.
6 Unit (6U) Physical Chassis check box
• Checked - Indicates 6U Physical Chassis’s are to be used.
• Unchecked - Indicates 9U Physical Chassis’s are to be used
SV8500 does not support 6U chassis configuration.
System Options section
This section determines how the system will be programmed, and what
commands will be used. It is used in reporting and consists of:
• Fusion -
Use the Fusion drop-down menu to specify the type of
Fusion network to which your system will connect. The option is not
available on SV7000 MPS. Select one of the following:
—NCN - Network Control Node (F
usion Network NCN)
— LCN - Local Control Node
(Fusion Network LCN)
— Standalone - NEAX IPX/IPX DM or UNIVERGE IPX only
• Fusion Point Co
de (LCN Only)
If the system is to be an LCN in a Fusion Network, select an
appropri
ate Fusion Point Code. It is useful to provide a technician this
information so the system can be configured to support these
features.
• Attendant
— Access to Attendant (Operator Call) - This
is the number of the
company’s operator. This number will be referenced in several
areas as a macro. It is used heavily in templates such as Call
Forwarding.
— Use Monitored Number as Attendant
• System Name field
This is the name of the system. Thi
s information will be assigned
internally to the system.
NOTE
NOTE