NEC MD21GS-3MP Computer Monitor User Manual


 
6
User Controls
1. LED Indicates power on and signal condition. The LED can be turned on,
off, or dimmed. Please refer to the Advanced OSM section/LED
Brightness for further information.
Green – signal is present and power is on
Orange – no signal
2. RESET Resets the highlighted control menu to the factory setting.
3. SELECT Enters the OSM controls and OSM sub menu.
4/5. ADJUST -/+ Moves the bar left/right to increase or decrease the adjustment.
6/7. CONTROL </> Moves the highlighted area left/right to select control menus.
Moves the highlighted area up/down to select one of the controls.
8. EXIT Exits the OSM Controls and OSM Main Menu.
9. Sensor Port
For optional external sensor used for self calibration and copy calibration.
10. On-Screen The key guide will automatically appear on the screen when any
Key Guide control button on the back is pressed. The key guide will change
orientation along with the OSM.
NOTE: When RESET is pressed in the main and sub-menu, a warning window will appear
allowing you to cancel the RESET function by pressing the EXIT button.
MD21GS3MPquickstart.p65 7/22/04, 9:52 AM6