NEC LT 100 Projector User Manual


 
The Remote Mouse Receiver as a mouse for your computer
INSTALLATION
53
54
Serial cable (supplied)
Serial cable
(supplied)
Remote cable
(supplied)
Remote Control
Output
The Remote sensors on the projector cabinet work as
the remote sensor on the Remote Mouse Receiver
You can daisy-chain as many as five projectors and operate them with the same remote control.
To do so:
1. Turn off your computer.
2. Use the remote control cables supplied to connect the Remote Control Output of one
projector to the Remote Control Input of the next until all the projectors are connected.
RGB INPUT
S-VIDEO
OUTPUT
INTPUT
RGB
REMOTE
CONTROL
Remote cable (supplied)
Insert the supplied remote cable here.