Filter
Top Products
6. InstallFix the console panel on the front side of the rack with attached screw A (four screws).
Console panel
Front side of the rack
7. Fix the rear panel on the rear side of the rack with attached screw A (four screws).
Rear panel
Rear side of the rack
8. Connect the console panel connection cable connected to the bottom at the rear side to the
console panel.
9. Put the attached cable clamp at any location of the back side of the server switch unit and
then fix the operation panel connection cable so that it may not be loosen.
Notice
Important: When the cable is fixed, note that excess tension may not be
applied to the connector.
A
djust the cable length
using the cable clamp.
Console panel connection cable
This portion should not be slackened.
- 47 -