Filter
Top Products
10
Specifications
Monitor MultiSync
®
FE950+
™
Notes
Specifications Monitor
Picture Tube Diagonal: 19 inch 90° deflection, 0.25 mm grille pitch,
Viewable Image Size: 18 inch medium short persistence phosphor,
Radius: 50,000 mm aperture grille CRT, multi-layered, anti-static
screen coating, dark-tint screen and
OptiClear
®
screen.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Horizontal: 30 kHz to 96 kHz Automatically
Range Vertical: 50 Hz to 160 Hz Automatically
Resolutions Supported 640 x 480 @ 50 to 160 Hz
Some systems may not support
Resolution based on
horizontal and
800 x 600 @ 50 to 146 Hz
all modes listed.
vertical frequencies only
832 x 624 @ 50 to 141 Hz
1024 x 768 @ 50 to 116 Hz
1152 x 870 @ 50 to 103 Hz
1280 x 1024 @ 50 to 89 Hz
1600 x 1200 @ 50 to 76 Hz................
NEC-Mitsubishi Electronics Display cites
recommended resolution at 85 Hz for
optimal display performance.
Active Display Area Horizontal:
356 mm/14.0 inches Dependent upon signal timing used,
(Factory Setting) Vertical:
267 mm/10.5inches and does not
include border area.
Active Display Area
366 mm/14.4 inches Dependent upon signal timing used,
(Full Scan)
275 mm/10.8 inches and does not
include border area.
Power Supply
AC 100 – 120 V/220-240V, 50/60 Hz
Current Rating 1.5A @ 100-120 V/0.7A @ 220-240V
Dimensions
442 mm (W) x 448.6 mm (H) x 444.5 mm (D)
17.4 inches (W) x 17.7 inches (H) x 17.5 inches (D)
Weight 23 kg
50.7 lbs
Environmental Considerations
Operating Temperature: +10°C to +35°C / +50°F to +95°F
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
Storage Temperature: -20°C to +60°C / -4°F to +140°F
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
950+.wpc 1/2/01, 10:04 AM12