NEC NP1000 Projector User Manual


 
16
5. Setting the LAN Setting of Projector
Setting Wireless LAN
1
Display the PC Card page of LAN Mode.
Configure the setting of wireless LAN in the "PC Card page of LAN Mode selected from On-Screen Menu.
<1> In the LAN Mode setting window, if the Built-in tab is highlighted, press the button
to highlight PC Card.
The PC Card page will be displayed.
If LAN Mode is not displayed, refer to 5-1. Displaying On-Screen Menu (LAN Mode) ( page 13).
2
Select Profiles.
<1> Press the
SELECT ̄
button once to highlight the Profiles field and press the button.
<2> Use the
SELECT ̄/̆
button to highlight Profile 1, and press the button.
Profile 1 or Profile 2 can be stored in the memory of the projector as the setting for LAN.
Easy Connection is a mode in which the personal computer that runs Image Express Utility 2.0 in
the User Supportware 3 CD-ROM is easily connected to wireless LAN.
Note that Easy Connection does not support software other than Image Express Utility 2.0.
When Easy Connection is selected, the IP address and subnet mask do not have to be set. To
use Easy Connection, the OS of the personal computer must be Windows XP ([Computer
Administrator] privilege). It cannot be used with Windows 2000.
The communication mode is 802.11 Ad Hoc.