NEC NP100/200 Projector User Manual


 
NEC Display Solutions of America, Inc.
NP100/200 Installation Guide
Ceiling Mounted and Desktop Rev 1.0
www.necdisplay.com NP100/200 Page 1 of 5
Contents
Product Description, Lens Specs, Notes and Formulas Pg 1
Diagrams & Distance Charts
Pg 2
Cabinet Dimensions
Pg 3-4
Ceiling Mount Dimensions and Input Panel
Pg 5
Product Description
Type: 1-chip DLP projector, Brightness: NP100: 2000 ANSI Lumens
0.55 DLP NP200: 2100 ANSI Lumens
Resolution: NP100: 800 x 600
NP200: 1024 x 768 Fan Noise: 35dB / 33dB @ 1 meter
Dimensions: 10.7” (W) x 3.5” (H) x 8.1” (D) Weight: 5.3 lbs
Power Consumption: 228W (max) BTU’s: 870 BTU/hour
Lens Specifications
Throw Ratio: 1.9 – 2.1:1 (for 100” diagonal) Focal Length: 21.83mm 24.00mm
Offset Angle: 12.8° - 14.0° (for 100” diagonal) F/#: 2.41 - 2.55
Screen Sizes: 27” - 300” diagonal (4:3) Manual Focus/Manual Zoom
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
All calculations are based on a 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Formulas
The Projection Formulas use the image width for calculation. For proper projection placement, determine the image width
for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plug in the width for “W” in
the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2:
Definitions: 4:3 Screen Formulas:
W = Image Width W = H x 4/3
H = Image Height (size) H = W x 3/4
B = Vertical distance between lens center and screen center Screen Diagonal = W x 5/4
C = Throw distance
D = Vertical distance between lens center and screen top
(screen bottom for desktop application)
Projection Formulas:
B = 0.489W
C (wide) = 1.948W
C (tele) = 2.15W
D = 0.113W
α (wide) = tan¯¹ (B/C(wide))
α (tele) = tan¯¹ (B/C(tele))