![](http://pdfasset.owneriq.net/6/5e/65e9e790-c086-4c64-a3b1-9ff289f974fe/65e9e790-c086-4c64-a3b1-9ff289f974fe-bg8b.png)
125
7. Maintenance
2. Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling
condition. The two screws are not removable.
Remove the lamp housing by holding it.
NOTE: There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this interlock.
3. Insert a new lamp housing until the lamp housing is plugged into the socket.
CAUTION
Do not use a lamp other than the NEC replacement lamp NP06LP.
Order this from your NEC dealer.
Secure it in place with the two screws.
Be sure to tighten the screws.
Interlock