Filter
Top Products
Figure 2
Important Note: To enter the On-Screen Menu (OSM) without a properly working
remote control, you must utilize the Menu button on the projector and scroll through
the tabs and selections with the Up/Down/Right/Left arrow buttons, and Enter/ Exit
buttons. Not all of the models have the same Menu structure, therefore, some of the
Tabs and Settings described in the following sections may be slightly different between
models.
5. Using the Menu button on the projector, confirm that the Control ID setting is set to
“Off.” The Control ID setting can be found in the projector’s OSM under Setup
Installation(2) Control ID.
See Figures 3 and 4.
Figure 3