NEC NP500WG Projector User Manual


 
56
5. Using On-Screen Menu
Adjusting the Vertical Position of Image [POSITION] (not available on NP500W)
(only when [16:9], [15:9], or [16:10] is selected for [ASPECT RATIO])
When [16:9], [15:9], or [16:10] is selected in [ASPECT RATIO], the image is displayed with black borders on the top
and bottom.
You can adjust the vertical position from the top to the bottom of the black area.
Selecting Video Filter Level [VIDEO FILTER] (not available for Digital RGB, Video and S-Video)
Select one of the three levels for reducing video noise: [OFF], [LESS] or [MORE].
OFF ........................ The low-pass filter is turned off.
LESS ...................... The low-pass filter is applied partially.
MORE .................... The low-pass filter is applied fully.
NOTE:
Selecting [OFF] will give best image quality by way of higher bandwidth. Selecting [LESS] will soften the image and selecting
[MORE] will soften the image more.