Filter
Top Products
ISSUED: 03-06-08 SHEET #: 055-9255-1
Visit the Peerless Web Site at www.peerlessmounts.com
8 of 10
For customer care call 1-800-865-2112 or 708-865-8870.
Align shoulder on connection block opposite notch
in adapter plate. Attach adapter plate to connection
block from projector mount assembly (A) using two
#10-32 x 3/8" serrated washer head socket pin
screws (C) as shown in figure 3.1.
CONNECTION BLOCK
C
NOTCH INDICATES
FRONT OF PROJECTOR
SHOULDER
Attaching Adapter Plate to Projector
3
fig. 3.1
DD
*Notch indicates front of projector.
Flip projector upside down and attach adapter
plate (AA) using two serrated socket pin screws (BB)
and retaining spacers (CC) as shown below. Tighten
using 4 mm allen wrench (DD).
AA
BB
CC
CC
Secure adapter plate with two knurled knobs (DD)
and retaining spacers (CC) in remaining hole.
NOTE: Retaining spacers (CC) go between the
projector and adapter plate (AA).
AA
*
5
AA
4