Filter
Top Products
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model)
16
Supported software for tape backup
The following table shows the support matrix of backup software and backup devices.
Notes
＜ARCServe＞
*a1: Do not disable the tape driver on the device manager.
＜
Backup Exec
＞
*b1: Do not install the Symantec driver. Apply the OS standard driver.
*b2: Do not install the Symantec driver. Apply the driver which comes with the tape device.
*b3: Use the latest driver which can be downloaded from the Symantec website.
- Disaster Recovery Option“ is not supported on the ft server system.
- Regarding NetBackup, client function only supported.
Notes for using the backup software
- When using BrightStor ARCserve for restore, please use the same tape drive product used at the
backup. A data exchange between different tape drives is not supported. Even if the same specification
tape is used, there may be an error or some problems since the BrightStor ARCserve controls differently
depending on the type of tape device.
ServicePack and update modules for BrightStor ARCserve can be downloaded from the CA
website (http://www.ca.com/).
"Disaster Recovery Option" is not supported on the FT server system.
- Update modules/drivers for Backup Exec can be downloaded from the Symantec website
(http://www.symantec.com/). You need to change the registry setting before reboot after
applying update module or driver installation. Refer to the User‘s Guide for the procedure.
“Intelligent Disaster Recovery option” is not supported on the FT server system.
- It is not supported to backup from NEC Express5800/ft series to a backup device directly using
NetBackup. However, NEC Express5800/ft series can be a backup-client machine of
NetBackup.
"Disaster Recovery Option" is not supported on the ft server system.
- When using Windows Server 2008 Hyper-V on FT server, prepare a separate server for backup.
For backup patterns, refer to each backup software company's web site.
ARCserve Backup Exec
ARCserve r15
Backup Exec 2010
OS
W2K8 W2K8
DAT N8151-51A Built-in DAT DAT72 SCSI O O*b1
LTO N8151-59 Built-in LTO（Half-Hight
）
Ultrium-2 SCSI O X
N8151-76 Built-in LTO（Half-Hight
）
Ultrium-3 SCSI O O*b1
N8151-101 Built-in LTO(Half-Higiht
）
Ultrium-2 SAS O*a1 O*b2
N8151-102 Built-in LTO(Half-Higiht
）
Ultrium-3 SAS O O*b2
N8151-90 Built-in LTO(Half-Higiht
）
Ultrium-4 SAS O O*b3
N8151-77 Built-in LTO（Full-Hight） Ultrium-4 SAS O O
O: supported X: not supported
Product
code
Type