Filter
Top Products
E – 45
List of Menu Items Available on Link Mode
9.
Function Link mode
Menu Source Select L
Adjust(Source) Picture L
White Balance L
Image Pixel Adjust L
Position N
Aspect Ratio L
Resolution L
Overscan L
Video Filter L
Blanking N
Video Adj N
Option Adj N
Lens Memory N
Signal Type N
Switcher N
Ref Adj Keystone N
Lamp N
Ref. White Bal. N
Factory Default N
Projector Options Timer L
Menu M
Setup N
Link Mode M
Switcher Control N
Help M
Test Pattern N
Direct Button LENS SHIFT Projector I
Remote Control N
FOUCUS Projector I
Remote Control I
ZOOM Projector I
Remote Control I
MENU Projector L (*1)
Remote Control L (*1)
POWER Projector L (*2)
POWER ON Remote Control L (*2)
POWER OFF Remote Control L (*2)
INPUT Remote Control L (*1)
MUTE(PICTURE) Remote Control L (*1)
MUTE(SOUND) Remote Control L (*1)
MUTE(OSD) Remote Control L (*1)
AUTO Remote Control N (*3)
TEST Remote Control N
PC Control All
Each letter used in the above note means the following
Letter Master projector Slave projector (s)
L valid linked
N invalid invalid
M valid invalid
I independently adjustable independently adjustable
See the table below for available functions in the digital link mode and the analog link mode.
See the table below for available functions in the digital link mode (SX6000 only) and the analog link mode.
* The digital signals available in the Link mode are the VESA compatible-signals except interlaced signals of VGA@60Hz to SXGA@75Hz.
* The VESA compatible signals that can connect to the master projector as analog input and connect to the slave projector as digital output are
interlaced signals of SVGA@85Hz, XGA@60Hz, XGA@70Hz, XGA@75Hz, XGA@85Hz, SXGA@60Hz and SXGA@75Hz.
* Video (NTSC, PAL, SECAM), YCbCr(50Hz/60Hz), 480p, 720p, SDI (525/625) signals can be supported.
Use a commercially available distribution amplifier to connect each projector when connecting the other signals.
No restriction.
Comply with the
above specifica-
tions.
*1 Each adjustment is not possible on the
slave projector in the link mode.
*2 Each adjustment is possible on the slave
projektor in the link mode.
*3 Auto Adjust in Setup is not available.