Filter
Top Products
E – 43
7. Optional Accessories
Lens TL-08SF (Short Focal Lens 0.84) : 10kg
TL-1Z/1ZH (Zoom Lens 1.5 - 2.5:1) : 5.5kg
TL-2Z (Zoom Lens 2.5 - 4.0:1) : 4.5kg
TL-4Z (Zoom Lens 4.0 - 7.0:1) : 4.5kg
Interface Board XT SDI BOARD
SX HDSDI
X DIGITAL RGB BOARD
Ceiling Mount Kit XT CMKIT
Switcher ISS-6020 Video/RGB Switcher
Three Interface boards are optionally available.
XT SDI BOARD
This board accepts the input of non-compressed signal sources such as commercial type digital VTR(e.g., D1/D5-VCR) compatible with digital
serial component signals (of the SMPTE 259M-C standard) and provides a high quality image without quantization noise. Note that the BNC cable
used with the SDI connector should be Belden 8281 cable, or 3C-2V equivalent cable or better.
Packaged items: SDI board (1), shield case (1), connector cable (1), and installation manual (1)
SX HDSDI Board
This board accepts the input of non-compressed signal sources such as commercial type digital VCR (D5-VCR) compatible with digital serial
component signals (of the SMPTE 292M standard) and provides a high quality image without quantization noise. This board accepts the following
image formats.
System
1920x1035/60/2:1
1920x1080/60/2:1
1280x720/60/1:1
1920x1080/24(sF)
Number of samples
of active 1 line
1920
1920
1280
1920
Number of active
lines in 1 frame
1035
1080
720
1080
Frame rate (Hz)
30
30
60
24
Scanning format
2:1Interlace
2:1Interlace
Progressive
Progressive
Sampling
frequency (MHz)
74.25
74.25
74.25
74.25
Total number of
samples in 1 line (dot)
2200
2200
1650
2750
Total number of
lines in 1 frame
1125
1125
750
1125
Note that the BNC cable used with the HDSDI connector should be 5C-FB equivalent cable or better.
Packaged items: HDSDI board (1), shield case (1), connector cable (2), flat cable (1), set screw for shield case (2) and installation
manual (1)
X DIGITAL RGB BOARD
Consult your dealer for the optional X DIGITAL RGB BOARD.