NEC VT460K Projector User Manual


 
E-5
INTRODUCTION
Introduction to the Projector
This section introduces you to your new VT660K/VT460K/VT560 Pro-
jector and describes the features and controls.
Congratulations on Your Purchase of The VT660K/
VT460K/VT560 Projector
The VT660K/VT460K/VT560 is one of the very best projectors avail-
able today. The VT660K/VT460K/VT560 enables you to project precise
images up to 300 inches across (measured diagonally) from your PC or
Macintosh computer (desktop or notebook), VCR, DVD player, docu-
ment camera, or a laser disc player.
You can use the projector on a tabletop or cart, you can use the projec-
tor to project images from behind the screen, and the projector can be
permanently mounted on a ceiling*
1
. The remote control can be used
wirelessly.
*
1
Do not attempt to mount the projector on a ceiling yourself.
The projector must be installed by qualified technicians in order
to ensure proper operation and reduce the risk of bodily injury.
In addition, the ceiling must be strong enough to support the pro-
jector and the installation must be in accordance with any local
building codes. Please consult your dealer for more information.
Features you'll enjoy:
Auto vertical keystone correction up to +/- 30 degrees
Low level operation noise
Short focal length lens
205W lamp (164W Eco mode) : VT660K/VT460K
200W lamp (160W Eco mode) : VT560
Direct keys for source selection
New Color Management system
New menu design improves operation
Safety protect by Security function
Security feature prevents the projector from being used by unautho-
rized individuals.
Keyword prevents unauthorized individuals from changing projector
settings or adjustments.
NEC’s exclusive Advanced AccuBlend intelligent pixel blending tech-
nology - an extremely accurate image compression technology - of-
fers a crisp image with UXGA (1600ן1200) resolution*
2
.
Supports most IBM VGA, SVGA, XGA , SXGA/UXGA(with Advanced
AccuBlend)*
2
, Macintosh, component signal (YCbCr/ YPbPr) or any
other RGB signals within a horizontal frequency range of 24 to 100
kHz and a vertical frequency range of 50 to 120 Hz. This includes
NTSC, PAL, PAL-N, PAL-M, PAL60, SECAM and NTSC4.43 stan-
dard video signals.
*
2
A UXGA (1600ן1200) and SXGA image (1280ן1024) are dis-
played with NEC’s Advanced AccuBlend on VT660K and VT560.
A UXGA (1600ן1200), SXGA (1280ן1024) and XGA
(1024ן768) image are displayed with NEC’s Advanced
AccuBlend on VT460K.
NOTE: Composite video standards are as follows:
NTSC: U.S. TV standard for video in U.S. and Canada.
PAL: TV standard used in Western Europe.
PAL-N: TV standard used in Argentine, Paraguay and Uruguay.
PAL-M: TV standard used in Brazil.
PAL60: TV standard used for NTSC playback on PAL TVs.
SECAM: TV standard used in France and Eastern Europe.
NTSC4.43: TV standard used in Middle East countries.
The supplied remote control can be used without a cable, and you
can even use the remote control to operate your PC's mouse
wirelessly from across the room with the built-in remote mouse func-
tion.
•You can control the projector with a PC using the PC Control port.
The contemporary cabinet design is light, compact, easy to carry,
and complements any office, boardroom or auditorium.
About this user's manual
The fastest way to get started is to take your time and do ev-
erything right the first time. Take a few minutes now to review
the user's manual. This may save you time later on. At the
beginning of each section of the manual you'll find an over-
view. If the section doesn't apply, you can skip it.
IBM is a trademark or registered trademark of International Business
Machines Corporation.
Mac and PowerBook are trademarks of Apple Computer, Inc., regis-
tered in the U.S. and other countries.
Windows, Windows 98, Windows Me, Windows XP or Windows 2000
are trademarks or registered trademarks of Microsoft Corporation.
Other product and company names mentioned in this user’s manual
may be the trademarks or registered trademarks of their respective
holders.