Filter
Top Products
5
Optical Bypass Switch
Unpacking and Inspection
Unpack the Optical Bypass Switch, power supply, and cables provided. Each
Optical Bypass Switch is delivered with the following:
For models N-IDP-POBPSX-001, N-IDP-POBPLX-002:
• 1 DC power supply
• 2 Duplex SC-SC ber cables
• 2 Duplex SC-LC ber cables
• 1 Manual
If any component is missing or damaged, contact Net Optics Customer
Service immediately.
Connecting the Optical Bypass Switch to the
Network
1. Connect Network Port A to the appropriate switch, server or router device
using a duplex SC ber cable. This acts as your DCE interface.
2. Connect Network Port B to the appropriate switch, server or router device
using a duplex SC ber cable. This acts as your DTE interface.
3. Verify that the Bypass Switch Network Ports are cabled in-line between two
devices.