Netac Tech T610 Network Router User Manual


 
Netac AirTrack T610 Wireless Broadband Router
23
4 Mode of build network
Note: The AirTrack T100, AirTrack T200, AirTrack T300, AirTrack T700 in the following pictures are
products of Netac, AirTrack T100, AirTrack T200 and AirTrack T300 are Wireless Network Interface Card,
AirTrack T700 is Broadband Router. You can choose the product of the same kind from the other
companies to build network.
4.1 Build at-home network
1. Building requirement
As a gateway of family LAN, T610 access Internet through ADSL Modem/Cable Modem/optic fiber.
l Suppose the PPPoE user name is "szhomeg@163.gd", password is "netac123".
l The laptop and bedroom desktop access Internet wirelessly, the wireless network name is "Home".
2. Figure
AirTrack T100 AirTrack T300 AirTrack T200 AirTrack T610
Figure 4.1 Build at-home network
3. Setup
l Configure WAN. According to the access mode, there are three configuration: use PPPoE protocol
when access Internet through ADSL Modem, input "szhomeg@163.gd" in the PPPoE User Name field
and "netac123" in the PPPoE Password field, then click "Apply"; when access Internet through Cable
Modem, please use DHCP protocol, click "Apply"; use DHCP or Static protocol when access Internet
through optic fiber, when use Static protocol, you need to configure IP address, gateway, subnet mask
and DNS server, click "Apply" button to effect the configuration. Figure 4.2 details the configuration.