NetComm 56K V90 Network Router User Manual


 
ITUV.34, V.32bis, V.32, V.29, V.27ter, V.23,
V.22bis, V.21, V.17
V.42 and MNP2-4 error control
V.42bis and MNP5 data compression
Full duplex, asynchronous, AT command set compatible
Fax group III compatible
Class I Fax Modem
Fax speed 14.4Kbps
MODEM SPECIFICATIONS
A Pentium 300Mhz or above PC
Microsoft Windows
®
95, 98, 2000, Me and XP
32Mb Ram for Windows
®
95/98,
128Mb Ram for Windows
®
2000 or XP
Hard Disk with 120MB free space
CD-Rom Drive for software installation
9 pin serial port
Telephone line
Power socket to plug in Plug Pack
Printer if you need to print faxes
MINIMUM SYSTEM SPECIFICATIONS
Do not connect your modem to a digital telephone line or PABX
56Kbps is the download speed and 33.6Kbps is the maximum
upload speed (both are subject to the telecommunications
carrier service)
IMPORTANT INFORMATION
56K V.90 serial modem
Driver CD
Quick Installation Guide
Serial connection cable
Phone line connection cable
Power Plug Pack – 9V AC, 800mA
PACKAGE CONTENTS
Your Netcomm dealer:
NetComm is Australia’s dynamic data communications and
networking solutions provider. For more information on this and
other NetComm products, please visit www.netcomm.com.au
NetComm Limited ABN 85 002 490 486
PO Box 1200, Lane Cove NSW 2066 Australia.
PHONE (02) 9424 2070 FAX (02) 9424 2010
www.netcomm.com.au EMAIL sales@netcomm.com.au
Trademarks and registered trademarks are the property of NetComm
Limited or their respective owners. Specifications are subject to change
without notice. Images shown may vary slightly from the product.
INFORMATION SHEET
Product Code CD1800