NETCOMM LIMITED ABN 85 002 490 486 • 2-6 Orion Road, LANE COVE, NSW, 2066 • phone 02 9424 2070 • fax 02 9424 2010 • email sales@netcomm.com.au
www.netcomm.com.au
NETWORKING & COMMUNICATIONS CONVERGED
Your Netcomm dealer:
NetComm is Australia’s dynamic data communications and
networking solutions provider. For more information on this and
other NetComm products, please visit www.netcomm.com.au
NetComm Limited ABN 85 002 490 486
PO Box 1200, Lane Cove NSW 2066 Australia.
PHONE (02) 9424 2070 • FAX (02) 9424 2010
www.netcomm.com.au • EMAIL sales@netcomm.com.au
Trademarks and registered trademarks are the property of NetComm
Limited or their respective owners. Specifications are subject to change
without notice. Images shown may vary slightly from the product.
BROADBAND ROUTER WITH 10/100 4-PORT SWITCH
HOME & MICRO BUSINESS
TECHNICAL SPECIFICATIONS
• NB2800 ADSL/Cable Router
• Cat-5 RJ45 straight through
Ethernet Cable
• Plug Pack 5VDC 1.0A,
Quick Start and Installation Guide
• Self-adhesive rubber feet
PACKAGE CONTENTS
Standards IEEE 802.3 10BASE-T
Compliance IEEE 802.3U 100BASE-TX
Interface WAN: 1x10/100Mbps Ethernet RJ-45
LAN: 4x10/100Mbps auto-sensing
switch ports within one uplink
port for LAN
Protocol TCP/IP, UDP, NAT, DHCP, PPPoE,
Telstra Heart Beat
PAP, CHAP
Maximum Users Up to 253 users
IP Setting WAN: DHCP client, Static IP
LAN: DHCP auto-assignment, Static IP
Management Web-Base UI management
Password authentication for
configuration
Fault-tolerance TFTP upgrade
firmware
WAN MAC address configuration
Remote configuration
Reset button for device reset &
factory default
Security NAT deny external intruder
Filter: IP filter, URL filter, MAC
filtering
Remote Access Special Application
Virtual server/Port forwarding
DDNS
Multiple Exposed Host (DMZ Host)
Routing RIP1, RIP2 compatible
Static Routing
VPN (PPTP, IPSec) pass-through
LED Display Power
Diagnostic
WAN: Link/Activity
LAN: Link/Activity, FD/collision
Power External, DC 5V, 1A
Environmental Operation Temperature: 0~45°
Storage Temperature:-20~70°
Humidity 0~90% non-condensing
Flash ROM Firmware upgradeable via TFTP
Certification C-Tick
Dimension 87 (L) x 150 (W) x 30 (H) mm
Mounting Desktop or wall mount
BASIC SYSTEM REQUIREMENTS
Allows multiple users to access Internet at the
same time by providing maximum Internet
utilisation to multiple users to share a single
public IP Address.
Acts as both DHCP client and DHCP server for
receiving WAN IP Address from ISP and configuring
IP Addresses to LAN PCs.
Web-based user interface for easy configuration
and management through web browser like
Netscape Communicator 4.0 or later or Internet
Explorer 4.0 or later.
Compatible with all popular Internet applications
and Cable and ADSL Service Providers.
NAT security protects internal users from outside
intruders.
Allows administrators to block certain users from
accessing the Internet, specific applications, or
certain web sites.
Can allow unrestricted two-way communication
between one PC on your LAN and certain Internet
services like conferencing, video and gaming
applications.
Enhances the routing performance with Dynamic
and Static routing options.
Allows change of WAN MAC address.
Allows authorised users to manage device
remotely.
SOFTWARE FEATURES
ADSL or Cable Modem with Ethernet connection port
PC running TCP/IP Ethernet ie: Windows®,
Mac OS or Linux
PC equipped with 10/100 Ethernet Port
Web Browser
ADSL or Cable ISP service
240 Volt GPO (Power Point)
Note: Additional Cat-5 Ethernet Cables required for
connection to multiple PCs.
Four 10/100
auto-sensing
switched ports
Power
Uplink port
– connect to
another switch
ADSL/Cable
modem
Ethernet port
Reset
button
3 YEAR WARRANTY
*
1 year warranty out of the box.
Extra 2 years FREE with online
registration at www.netcomm.com.au
*Conditional upon registration online.
N367