Filter
Top Products
Rev.2 - YML630 www.netcomm.com.au
Cable/DSL Firewall Router Page 19
3-2 Web-based User Interface
The NetComm Cable/DSL Firewall Router uses a Web-based User Interface for configuration.
Start your web browser and type http://192.168.1.1 in the browser’s address box. This address
is the factory default IP Address of your NetComm Cable/DSL Firewall Router. Press “Enter”.
The “Username and Password Required” prompt box will appear. Leave the “User Name”
empty and type “admin” (default password) for the “Password”. Click “OK”. The setup
screen will load.
Note: The password can be reset by restoring the factory defaults with the Reset
button.