NetComm NB3100 Network Router User Manual


 
www.netcomm.com.au Rev.2 - YML630
Page 18 Cable/DSL Firewall Router
Chapter 3: Internet Access
This chapter describes the procedures necessary to configure the basic functions and to start up
your NetComm Cable/DSL Firewall Router. On successful completion of these procedures, you
will be able to access the Internet via your NetComm Cable/DSL Firewall Router.
3-1 Prepare your network information
In order to allow a quick reference point when setting up your NetComm Cable/DSL Firewall
Router, it is suggested you complete the table below with the necessary information, which
should be supplied by your ISP:
Provided by some ISPs (
tick indicates common minimal requirements)
Host Name: ______________________________________
Domain Name: ______________________________________
IP address given by ISP:
✓❒ Obtain IP Address automatically, or
✓❒ Static IP
IP Address (if static): _________._________._________._________
Subnet Mask: _________._________._________._________
Default Gateway: _________._________._________._________
DNS Server Primary: _________._________._________._________
DNS Server Secondary (optional): _________._________._________._________
DNS Server Third (optional): _________._________._________._________
PPP authentication:
✓❒ PPPoE
PPTP
User Name: ______________________________________
Password: ______________________________________