www.netcomm.com.au Rev.2 - YML630
Page 34 Cable/DSL Firewall Router
■ Access Log Set to Enable if you want to activate this function.
■ Send Log To Enter the IP address of the computer that you want to send the Log
information to.
■ Incoming Access log Click this button to go to the incoming (WAN to LAN) traffic log
table. This Table records information on the last fifty incoming packets, including source IP
address, destination IP address, and port number.
■ Outgoing Access log Click this button to go to the outgoing (LAN to WAN) traffic log
table. This Table records information on the last fifty outgoing packets, including source IP
addresses, destination IP addresses, and port numbers.
Click “Apply” after making any changes.
4-12 VPN Passthrough
Virtual Private Networking (VPN) is a system which allows remote networks to privately
exchange data over an existing public network (usually the WAN/Internet). One VPN client can
be used to make one VPN connection (Tunnel) to a VPN Server on the Internet. The NetComm
Cable/DSL Firewall Router supports one single session VPN Passthrough (PPTP or L2TP/
IPSec). There is no configuration necessary for VPN Passthrough.