NetComm NB6 Network Router User Manual


 
NETCOMM LIMITED ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia
P: 02 9424 2070 F: 02 9424 2010 E: sales@netcomm.com.au W: www.netcomm.com.au
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are
subject to change without notice. Images shown may vary slightly from the actual product.
NetComm NB6
ADSL2+ Modem Router with Ethernet and USB interfaces
TECHNICAL SPECIFICATIONS
Your NetComm dealer:
PACKAgE CONTENTS
NB6 ADSL2+ Modem Router
9 VAC, 1A power supply
RJ-11 ADSL Line connection
cable
RJ-45 10/100 Ethernet cable
USB Cable
Driver & Utility Software CD
User Guide - On CD
Quick Start Guide
NB6 ADSL2+ Modem Router
Perfect for users who prefer having a direct connection through USB to their computer or for those
who don’t have a network card the NB6 is the ultimate in choice with both Ethernet and USB
connections to suit all users. The feature packed NB6 also comes with a NAT firewall, QoS and
works with ADSL, ADSL2 and ADSL2+ and has an easy to use web interface for advanced users to
configure the NB6 to suit their needs.
ADSL COMPLIANCE
ADSL
ANSI T1.413 Issue 2
ITU G.992.1 Annex A (G.dmt)
ITU G.992.2 Annex A (G.lite)
ITU G.994.1 (G.hs)
Maximum Rate: 8 Mbps downstream and 1 Mbps upstream
ADSL2
ITU G.992.3
ITU G.992.4
Maximum Rate: 12 Mbps downstream and 1 Mbps upstream
ADSL2+
ITU G.992.5
ITU G.992.5 Annex M
Maximum Rate: 24 Mbps downstream and 1.2 Mbps upstream
ATM
PPPoA (RFC 2364) and PPPoA Bridged mode
PPPoE (RFC 2516) and PPPoE Bridged mode
IPoA (RFC 2225)
Bridged mode over AAL5 (RFC2684/1483)
ATM Forum UNI 3.1 / 4.0 compliant PVCs
UBR and CBR with traffic shaping
OAM F4/F5 loopback cells
BRIDgINg
IEEE 802.1d self-learning bridge
Learning up to 4096 MAC addresses
Transparent Bridging between 10/100 Mb Ethernet and USB
ROUTINg
NAT / PAT allows multiple users to share Internet access
UPnP IGD with NAT traversal capability
Port Forwarding: users can setup multiple virtual servers (e.g.,
Web, FTP, Mail servers) on the local network.
Static routing & dynamic routing RIPv1/v2
DNS Relay, Dynamic DNS
DHCP Client/Relay/Server
IGMP Proxy
Support IP/Bridge QoS for different traffic classes
Support reservation of bandwidth to guarantee voice quality of VoIP
applications.
SUPPORTED APPLICATIONS
Application Level Gateways preset for Auth/Ident, DNS, FTP, PPTP,
IPSEC, POP3, SMTP, SSH, TELNET, TFTP & WEB servers. Multiple
Virtual Servers can be setup in local network.
VPN passthrough: PPTP & IPSEC.
NetMeeting, MSN Messenger, FTP, Quick Time, mIRC, Real Player,
CuSeeMe, online gaming.
SECURITY
PAP, CHAP, and MS-CHAP for PPP authentication
Firewall based on incoming & outgoing filtering of IP address/Port
number/Protocol type.
Ping blocking from WAN.
DMZ hosting.
CONFIgURATION AND MANAgEMENT
Embedded web configuration interface with password protection
Remote management control
Telnet session for local or remote management
System events logging
DSL connection diagnostics
Firmware upgrade via web browser
User setting backup & restore
HARDWARE INTERFACE
One RJ-11 port for ADSL connection
One Ethernet port for IEEE 802.3/802.3u 10/100 Base-T auto-
sensing, auto cross-over.
One USB port compliant to USB v1.1
One hidden reset button for restoring factory default settings
CHIPSET
Broadcom BCM6338 single-chip ADSL2+ with integrated MIPS32
CPU, transceiver & Analog Front End.
REgULATORY APPROvAL AND COMPLIANCE
ACA
POWER REqUIREMENT AND OPERATION
Environment Requirement
Power Adaptor: Output 9 VAC, 1A
Power Consumption: less than 5 W
Ambient Temperature: 0 to 40°C
Relative Humidity: 20% to 90% (non-condensing)
Physical
Front Panel: 5 LED Indicators - Power, ADSL, PPP, Ethernet, USB
Dimensions: 88mm(L) x 105mm(W) x 20mm(H)
Weight: 58g
Internet
Firewall
Telephone
Wall Socket
Splitter with
Microfilter
Connected to
USB Interface
Connected to
Ethernet Interface
Power
Ethernet
Line
Reset
USB
LINE Port
USB
Reset
Ethernet
On/Off, Power
NB6
ADSL2+ Broadband Modem
Home
Telephone