NetComm NB600W Network Router User Manual


 
Internet
Cable or ADSL
Modem
NB600W
Super-G Wireless Router
Connected to
11g Wireless Interface
Connected to inbuilt
4-port Ethernet Switch
Ethernet cable to WAN Port
WAN Port
4-Port Ethernet Switch
Power
TECHNICAL SPECIFICATIONS
NETWORKING/TRANSPORT LAYER PROTOCOL
802.1D Bridge for LAN and Wireless bridging
DHCP server
PPPoE, Telstra BigPond, DHCP client and Fixed IP for
broadband DSL/Cable ISP connection (eg Optus Cable)
MAC address spoofing
Static routes
DNS proxy
Dynamic DNS for dynamic IP based domain name service
NTP client for network time synchronisation
802.11g Access Point – backwards compatible with
802.11b devices
FIREWALL/NAT
Stateful packet inspection
DoS attack prevention
Virtual Server/Port Forwarding
Supports UPnP
One DMZ host
IP packet filtering with scheduling (MAC based access
control list)
Event logging and email alert for DoS attack
ALG support including: IPSec, PPTP, L2TP, H.323, SIP,
NetMeeting, MS Messenger, RealPlayer, Quick Time (ICQ,
CuSeeMe, VDO Live, Quake III, Diablo II, Age of Empires II)
WIRELESS SECURITY
Supports 40/64, 128 and 152-bit WEP encryption
MAC based access control list
Wireless Access Control (SSID)
Wi-Fi Protected access (WPA) compatible (Pre-shared Key)
802.1x
WEB CONTENT FILTERING
Supports true proxy-based URL blocking with scheduling
MANAGEMENT
Web-based configuration wizard
Web-based firmware upgrade, configuration profile
backup/restore
Remote management
Supports Windows
®
-based syslog viewer
ACCESS INTERFACE
WAN: One 10/100 Base TX port, auto-sensing, auto MDIX,
RJ-45 connector
LAN: Four 10/100 Base TX ports, auto-sensing, auto
MDIX, RJ-45 connector
Wireless: External Antenna, frequency: 2.412~2.484 GHz,
supports 13 channels, data rates 6, 9, 12, 18, 24, 36, 48 and
54 Mbps auto fallback function, Super-G Wireless Mode
LED INDICATORS
LED 1 – 4 shows status of local port #1 – 4
WLAN LED shows Wireless LAN connection
WAN LED shows WAN/Internet port status
Power LED
Reset Button (factory default-setting button)
ENVIRONMENT
Operation Temperature: 0°C ~ 45°C
Operation Humidity: 5% ~ 95%
Storage Temperature: -20 ~+85°C
Storage Humidity: 5% ~ 95%
POWER
AC Adaptor: Input 240V AC; Output 12V DC/1.0 Amps
• Maximum power consumption: 10 Watts
DIMENSIONS & WEIGHT
180mm x 143mm x 40.5mm (W x D x H); 320g without holder
CERTIFICATION
C-Tick
PACKAGE CONTENTS
NB600W Super-G Wireless Gateway
Power supply
Vertical mounting foot
Manual/Tutorial CD
Package Contents List
Quick Start Guide
NB600W Super-G Wireless Gateway
NETCOMM LIMITED ABN 85 002 490 486 PO Box 1200, Lane Cove NSW 2066 Australia
P: 02 9424 2070 F: 02 9424 2010 E: sales@netcomm.com.au W: www.netcomm.com.au
Trademarks and registered trademarks are the property of NetComm Limited or their respective owners. Specifications are
subject to change without notice. Images shown may vary slightly from the actual product.
Your NetComm dealer:
KEY FEATURES
Supports PPPoE, DHCP Client and Server, TCP/IP, UDP, ICMP, DNS Proxy,
Dynamic DNS, SNTP features
Four 10/100M Base TX ports for PC or LAN connection and one 10/100M Base
TX WAN port for broadband connection
802.11g Wireless Access Point supports up to 54Mbps
108Mbps Super-G wireless mode – turbocharge your transfer rates*
Supports automatic hacker pattern detection to block malicious intrusions
Network Address Translation (NAT) conceals private network from the Internet
VPN passthrough allows secure communication protocols
Web-based user interface for easy installation, configuration and management
Virtual Server/Port Forwarding allows outside users to access internal servers
via the Internet
Administrators can block specific users’ Internet access by UPI
(User Profile Identification)
Supports UPnP for easy device discovery and advanced Internet applications
3-YEAR WARRANTY WHEN YOU REGISTER ONLINE
1 year warranty out of the box. Extra 2 years FREE with online registration at
www.netcomm.com.au
Conditional upon online registration)
*When used in conjunction with compatoible wireless client adaptors