Filter
Top Products
www.netcomm.com.au Rev. 1 - YML678
Page 24 NP5420 11G Wireless PC Card User Guide
Using Wireless Utility In Windows XP
Wireless LAN Utility
There are two ways to configure the NetComm NP5420 11G Wireless PC Card. One is using
the NetComm NP5420 WLAN Utility; the other one is using Windows XP’s Wireless Network
Configuration. Once your NP5420 card is installed and your operating system has drivers
loaded you must configure a WLAN Utility to specify the correct settings to join your Wireless
LAN. Windows XP comes with a built-in WLAN utility, you can choose to use the XP utility
or use NetComm's utility as provided on the CD-ROM. Windows 98/ME/2000 installations
will need to use the NetComm utility.
Note: You must use only one of these utilities at any one time to manage the operation of
the card if you are having trouble disabling the Windows XP WLAN utility see the
trouble shooting section for more information. If you wish to always use the
Windows XP WLAN utility you should move the shortcut for the NetComm utility
from the Startup section of your Start menu to your desktop - this will prevent the
NetComm Utility from launching when Windows is started.
Using Windows Wireless Network Configuration
1. Click the right key of the mouse on the Wireless LAN Utility icon and select Exit from the
pop-up menu.
2. Click on the Windows Wireless Network Configuration icon.
3. The Connect to Wireless Network window will appear. Click on the Advanced button.