NetComm NP545 Computer Drive User Manual


  Open as PDF
of 2
 
D. Check wireless connection for Windows XP
a. Configure using NetComm NP545 Utility
After Installing the adapter, the adapter’s tray icon will appear in your system tray. To
use the NetComm Utility, double-click it. The steps for windows XP and windows 2000 are
very similar. Please refer to C. Check wireless connection for Windows 98/ME/2000.
b. Configure using Windows XP Wireless Zero Configuration
1. Windows XP will display a wireless Network Connection message. To use Windows XP
Wireless Zero Configuration, double click on this message.
2. The screen that appears will show you many available wireless networks. Highlight the
network that you want, and then click Connect.
Note: The steps below are the instructions for Windows, if you have installed a Service Pack, it will not affect the setup. Windows menus
are almost the same, and as such the following steps can still be consulted.
3. A screen will appear if the connection is finished.
Note: For more information about Windows XP Wireless Zero Configuration on a Windows XP computer, refer to Help and Support of the
Operating System. If a well-balanced wireless network cannot be created, please refer to the User Guide on the Resource CD or your
dealer for help.
Product Warranty
NetComm products have a standard 12 months warranty from date of purchase. However some products
have an extended
warranty option, via registering your product online at the NetComm website
www.netcomm.com.au. Refer to the User Guide
for complete product warranty conditions, limitations of
warranty and other legal and regulatory information.
Contact Information
If you have any technical difficulties with your product, please do not hesitate to contact NetComm’s Customer
Support Department.
Email: support@netcomm.com.au
www.netcomm.com.au
Note: NetComm Technical Support for this product only covers the basic installation and features outlined in the Quick Start Guide. For
further information regarding the advanced features of this product, please refer to the configuring sections in the User Guide or contact
a Network Specialist.
NetComm Limited ABN 85 002 490 486
PO Box 1200, Lane Cove NSW 2066 Australia
E – sales@netcomm.com.au W – www.netcomm.com.au
 previous