Troubleshooting 6-1
202-10083-01
Chapter 6
Troubleshooting
This chapter provides information about troubleshooting your NETGEAR 54 Mbps Wireless USB
Print Server with 4-Port Switch WGPS606. After each problem description, instructions are given
to help you diagnose and solve the problem. For the common problems listed, go to the section
indicated.
• Is the WGPS606 on?
• Have I connected the wireless USB print server correctly?
Go to “Basic Installation and Configuration” on page 3-1.
• I cannot remember the wireless USB print server’s configuration password.
Go to “Using the Reset Button to Reboot or Restore Factory Defaults” on page 4-4.
This chapter gives information about troubleshooting your NETGEAR 54 Mbps Wireless USB
Print Server with 4-Port Switch WGPS606. After each problem description, instructions are
provided to help you diagnose and solve the problem. For the common problems listed, go to the
section indicated.
• Is the wireless USB print server on and is the Status light lit?
Go to “Bottom Label Description” on page 2-4.
• Have I connected the wireless USB print server correctly?
Go to “Set Up the Print Server” on page 3-4.
• I can’t access the wireless USB print server from my computer.
Go to “Now, Set Up a PC” on page 3-5
Note: For up-to-date WGPS606 installation details and troubleshooting guidance visit
http://kbserver.netgear.com